Rollei Compactline 10x - Preparing the Camera for Use; Installing the SD memory card

ENGLISH
52
Preparing the Camera for Use
Installing the SD memory card
An external memory card is required for use. Your camera supports any compatible SD memory
card (up to 64 GB).
1. The SD memory card slot is located next to the battery.
2. Insert the memory card into the slot in the correct direction.
3. Push the card in until it clicks into place. The top of the card should be flush with the surface
of the camera.
4. Once the external memory card is inserted into the camera, all images taken with the camera
will be stored on the card.