73
Settings
1. Press menu button to enter the setup menu in camera mode.
2. Press right button to select the setup menu, then press menu to enter into the menu.
3. Press the up / down button to select format memory card from the setup menu.
4. Press menu button to enter into next menu.
5. Press up / down button to select yes / no.
6. Press menu button to confirm and begin the format.
7. Once the SD card is formatted all the images on the card will be erased and the camera will revert to the
camera standby mode.
Factory settings
You can restore your camera to the original factory settings.
1. Press menu button to enter the setup menu in camera mode.
2. Press right button to select the setup menu, then press menu to enter into the menu.
3. Press up / down button to select factory settings in the setup menu and press menu enter into next menu.
4. Press up / down button to select yes / no.
5. If you selected yes, a default setting confirmation message will appear: Completed.
6. Press mode button to exit the setup menu.
To Next Page
Loading...
