..............................................................................
..............................................................................
102
Compatibility with older components
With the exception of SLX and 6002
backs, all interchangeable components can
be used on the 6008 AF, although some of
them only to a limited extent.
Using the interchangeable type 6006
magazine
When interchangeable magazines for the
Rolleifl ex 6006 are used, the ISO speed will
not be transferred automatically because
these magazines do not allow any fi lm-
speed setting.
In this case, your Rolleifl ex 6008 AF will
default to ISO 100/21°. Should you use
fi lm of different speed, make the neces-
sary correction by means of compensation
switch 43. The exposure-compensation
icon will not be displayed in this case.
Films with speeds from ISO 25/15° to
2500/35° can thus be used according to
the following table:
If necessary, type 6006 magazines can be
converted at the Rollei factory.
Please note:
While the back of a Rolleifl ex 6002 or SLX
can be attached to the body of the Rol-
leifl ex 6008 AF/6008 integral2, blur must
be expected due to a lack of fi lm fl atte-
ning.
Magazines of the Rolleifl ex 6008 AF/6008
integral2 or 6008 Integral, on the other
hand, should never be attached to a Rol-
leifl ex 6002 or SLX body, or mechanical
damage is unavoidable!
Film inserts of the Rolleifl ex SLX (which
may be recognized by interior icons and
indices) should not be used because they
may jam when they are removed.
COMPATIBILITY
ISO 25 50 100 200 400 800 1600 2500
EV compensation
+2 +1 0 -1 -2 -3 -4 -4
2
/3
To Next Page
Loading...
Need help?
General
