..............................................................................
..............................................................................
48
Depth-of-fi eld preview
To check depth of fi eld on the ground-
glass screen, press stop-down button 32.
Flip up the viewfi nder magnifi er for opti-
mum viewing ease.
AE lock
In diffi cult lighting conditions – e.g. in the
case of high subject contrast or backlight
– take a reading of the most important
part of your subject and store the result by
pressing or locking memo button 27 until
after the exposure.
The exposure value will remain in memory
until the memo button is released. In the
multi-spot mode, a slight depression of
the memo button serves to store separate
spot readings. In the display panel 12, the
memo mode is marked by square brackets
around the light balance.
Note:
With the memo button pressed or locked,
the camera will remain active for an addi-
tional four minutes.
DEPTH-OF-FIELD PREVIEW
27
32