Rollerdor RD55 - Page 17

Rollerdor RD55 and RD77 Roller Garage Door User Guide
CE - Declaration of Conformity
(According to 89/106/EEC Directive, Annex III.2(ii),second possibility)
Rollerdor Ltd
10 & 12 Jarrold Way, Bowthorpe Employment Area, Norwich, Norfolk NR5 9JD
Hereby declares that Roller garage doors series RD55 & RD77
Applied directives and harmonized standard:
EN 13241-1:2003+ A1:2011 Industrial, commercial and garage doors and gates – Product standard –
Part 1: Products without re resistance or smoke control characteristics.
Directive 89/106/EEC EC building products directive
Characteristics
Water Tightness
Release of dangerous
Resistance to wind load
Thermal resistance
Air permeability
Safe operating
Denition of geometry of glass components
Mechanical resistance and stability
Operating forces (for power operated doors)
Durability of the performance characteristics
Technical class, Value / Conformance
NPD
NONE
Class 2 RD55 / Class 3 RD77
NPD
NPD
PASS
NPD
NPD
PASS
NPD
Manufacture:
Rollerdor
10 Jarrold Way
Bowthorpe Employment Area
Norwich
Norfolk NR5 9JD
Colin Browne
Manager
20/06/2013
Installer:
Date of install:
Additionally for doors with an electric drive:
Directive 2006/95/EC Low-voltage directive
Directive 2006/42/EC EC machinery directive
Directive 2004/108/EC EMC directive
Conform to the relevant conditions in prescribed combinations with:
AN-Motors electric motors Tubular electric motor NM1-PP/50-12, NM2-PP/80-12
Ningbo Dooya Mech electric motors Tubular electric motor ED050/12(M), ED059-100 (M)
Josef Timmer Safety brake IB/95-17, IB/147
L.N.R Safety brake DR-70, DR-140
This conformity is substantiated by the following:
• Protocol on product initial type testing (ITT) type No. 1017-CPD-06.578.210 from 23.05.2013, TUV SUD, Czech
Republic (Notied Body 1017)
• Protocol on product initial type testing (UKAS) type No. 0621 from 12.06.2013, Exova Warrington APT (Notied
Body 1014)
16