rollibot puro - Maintenance and Cleaning; Canister Components; Detaching and Reattaching the Canister

As with proper storage, proper maintenance will help improve your Puro vacuum’s
performance. Periodically, the Canister will need to be emptied and its lter cleaned . It is
also recommended to inspect all attachments and clean everything regularly. Please make
sure your vacuum is completely powered o before performing any type of maintenance.
Section 5. Maintenance Instructions
5.1 – Canister Parts
Top
Center Ring
Canister Clip
Canister Lock
Bottom
Fitration System
Canister Clip
Filter
Body Lock
5.2 – Detaching & Reattaching the Canister
Press the Body Lock to remove the
Canister from the Main Body of the
vacuum.
Step 1
Reattach the Canister to the Main
Body. For a secure t, make sure the
notches on each part connect.
Step 2
Clean the outside with dry, non-abrasive cloth only. Do not spray water or liquids onto the Puro.
Do not perform any maintenance when the power is on or the battery is charging.
Do not place the Puro near any source of significant heat or combustible materials.
•
•
•
07