Rollplay 6V GMC Sierra User Manual (English)

Questions and Answers:

J
James Hernandez MDJul 27, 2025
What to do if Rollplay 6V GMC Sierra Toy vehicle does not run?
- C
  cheryl74Jul 27, 2025
  If your Rollplay Toy vehicle isn't running, there are several potential causes. First, the battery might be low, in which case you should recharge it. Another possibility is that the thermal fuse has tripped, requiring a reset. Check if the snap pins are loose and tighten them if necessary. Also, ensure the battery connectors are securely attached, and if you notice any loose wires, it's best to contact Customer Service for repairs. In some cases, the battery might be dead, or the electrical system or motor could be damaged, which would also require contacting Customer Service.
M
mhodgeAug 2, 2025
Why does Rollplay 6V GMC Sierra vehicle only run for a short time?
- J
  Janet PayneAug 2, 2025
  If your Rollplay Toy vehicle only runs for a short time, it could be due to several reasons related to the battery. The battery might be undercharged, so ensure a secure connection during recharging and allow it to charge for at least 8-12 hours. Alternatively, the battery could be overcharged, so never charge it for more than 30 hours. Finally, if the battery is old, consider replacing it.
D
dana35Aug 7, 2025
Why does Rollplay 6V GMC Sierra Toy vehicle run slowly?
- S
  susancookAug 7, 2025
  If your Rollplay Toy vehicle is running slowly, the issue could stem from a few factors. Ensure the battery is fully charged by checking for a secure connection during recharging. If the battery is old, you may need to contact Customer Service to order a replacement. Also, check if there is too much weight on the vehicle, and if so, reduce it to a maximum of 50 lbs. Lastly, harsh conditions, such as uneven surfaces, can affect speed, so operate the vehicle on level ground and safe surfaces.
W
Whitney TorresAug 13, 2025
What to do if Rollplay Toy vehicle needs a push to start?
- W
  watsonsandraAug 13, 2025
  If your Rollplay Toy vehicle needs a push to start, it could be due to loose wires or connectors, so ensure the battery connectors are securely attached. If the wires are loose, contact Consumer Service for repairs. Another potential reason is a “dead spot” on the motor, meaning electricity isn't reaching the terminal, in which case you should contact Consumer Service for repairs.