Rollz Motion - Maintenance and Care; Adjusting the Brakes; Cleaning and Disinfection Procedures

16
EN
Maintenance
Regular maintenance will increase the life and safety of your Rollz Motion.
Adjusting the brakes
Repeated use may wear out the brakes of the Rollz Motion. De brakes may
have to be adjusted. The correct adjustment of the brakes will prevent potential
problems and gets you the best use out of your Rollz Motion.
a. After squeezing the handbrakes right in, the Rollz Motion should be
unable to move. After releasing the handbrakes, the Rollz Motion
should be able to move freely.
b. Turn the adjusting screw clockwise or anti-clockwise to achieve the
above properties.
PLEASE NOTE: Stop using the Rollz Motion and contact your supplier if the
brakes fail to operate adequately after you have performed the above-
mentioned steps.
Cleaning/ disinfection
Frequent cleaning of the Rollz Motion is recommended to keep it in optimal
condition. Before passing the Rollz Motion on to a new user, it has to be
disinfected.
Clean the frame and handgrips using lukewarm water and a cloth. For more
resistant stains you can use a mild detergent. Avoid excessive water contact
with moving parts, such as axles and hinge points. Thoroughly dry your Rollz
Motion after cleaning.
The wheels can be cleaned using lukewarm water and a brush with plastic
bristles (Attention: Do not use a wire brush)
The cover of the seat cushion is washable; always remove the inner cushion
before washing.