Rollz Motion - Adjusting the Wheelchair Backrest

To Next Page

To Previous Page

Backrest Rollz wheelchair

In order to ensure maximum comfort, it is important to adjust the straps in the

back of the wheelchair package. To do so please follow the next three steps:

a. Remove the footrests from the wheelchair bag and make sure the back

of Rollz wheelchair package is extracted (see: page 46).

b. Loosen the Velcro at the back of the wheelchair package by pulling the

bag upwards.

c. Adjust the straps by loosening the Velcro. Adjust the straps in a way that

allows the pelvis of the user to be upright and makes sure the user‘s

back is properly supported.