Rollz Motion - Folding the Wheelchair Package; Detaching the Wheelchair Package

25
EN
Folding the wheelchair package
a. Slide the footrests up until released from the footrest holders. Put them
back into the luggage bag for the Rollz wheelchair package.
b. Turn the adjustment knobs for the handles anti-clockwise and turn the
handles around via the outside, until they are pointing towards the
front. Adjust the height for yourself and turn the adjustment knobs
clockwise to tighten. (See: adjusting/posture).
d. Hold the handle of the wheelchair package and push the backrest
forward until halfway up the frame. Next, push the backrest backward
and down until it fits against the seat.
After folding away the Rollz wheelchair function, you can leave it on the Rollz
Motion while you walk. In that case, you will walk behind the Rollz Motion.
Disengaging the Rollz wheelchair package
a. Pull the red handle up without any force.
b. Hold the handle of the Rollz wheelchair package and pull it up without
any force.
c. Then push the red handle down again.