Rollz Motion - Attaching the Wheelchair Package

Attaching the Rollz wheelchair pack
a. Take the Rollz wheelchair package and hold the wheelchair bag
towards you (Fig. 16).
b. Use your other hand to pull the red handle up and place the Rollz
wheelchair package in the guide rails against the seat (Fig.18) .
c. Push the red handle down without any force. You can now simply walk
behind the Rollz Motion (Fig. 17 and 19).
PLEASE NOTE: If the red handle is not going down without exerting force, take
the Rollz wheelchair pack back out of the guide rails and try again. Do not
put any pressure, as this may damage the Rollz Motion. Please contact your
supplier if you have still no luck after several attempts.
21
EN
‘unlock’ ‘lock’
Figure 16 Figure 17
Figure 18
Figure 19