10
Instruction manual
GB
Introduction
We are pleased you decided in favour of this practical tin opener and would like to thank
you for your confi dence. Its easy operation will certainly fi ll you with enthusiasm as well.
Tomakesureyoucanenjoyusingthisapplianceforalongtime,pleasereadthroughthe
following notes carefully and observe them. Keep this instruction manual safely. Hand out all documents
to third persons when passing on the appliance. Thank you very much.
Intended use
The appliance is designed for opening tins, for opening bottles with crown cap as well as for sharpening
knives (domestic use only). Other uses or modifi cations of the appliance are not intended and harbour
considerable risks. For damage arising from not intended use, the manufacturer does not assume liability.
The appliance is not designed for commercial use.
Technical data
Only connect the appliance to an isolated ground receptacle installed according to regulations.
The rated voltage must comply with the details on the rating label. Only connect to alternating current.
Nominal voltage: 220–240 V~ 50 Hz
Nominal power: 60 W
Standby-consumption: < 0.5 W
Protection class: II
Max. continuous operation time: 3 minutes
Max. weight of tin (gross): 850 g
Max. size of tin: 175 mm height, 100 mm Ø
Scope of supply
Check the scope of supply for completeness as well as the soundness of the product and all components
(see product description page 2) immediately after unpacking.
Packing material
Do not simply throw the packing material away but recycle it.
Deliver paper, cardboard and corrugated cardboard packing to collecting facilities. Also plastic packing
material and foils should be put into the intended collecting basins.
In the examples for the plastic marking PE stands for polyethylene, the code fi gure
02 for PE-HD, 04 for PE-LD, PP for polypropylene, PS for polystyrene.
To Next Page
Loading...