Rommelsbacher DO 65 - Attaching and Detaching the Front Lever; Opening Tins; Fixing the Tin

13
Opening tins
ATTENTION! The appliance is designed for a max. continuous
operation time of 3 minutes. If this time has elapsed, the appliance
has to cool down for at least 2 minutes. If this is not observed, the
motor might get damaged!
ATTENTION! Do not touch the running driving wheel or the blade!
Inordertoavoidinjuries,handlethebladewithcare!
1.) Fixing the tin
NOTE:Iftheopeningofatinissuccessful,dependsheavilyonthetin’squality.Foropening,atinwitha
sufficient rim on the upper side is necessary. Furthermore, the tin should not be damaged or dented. The
tin must not have a pull tab lid. Several attempts might be necessary for opening the tin.
Attaching and detaching the front lever
• Makesurethattheappliancehasbeenunplugged.
• Fordetachingthefrontleverfolditupasfarasitwillgoandpullitforwardsoutofthemounting.
• Forattaching,insertthepinofthefrontleverintothecorrespondingopeningattheunit,thenpushthe
front lever to the back as far as it will go