CORDLESS SPRAY GUN
12
- Cover screw threads or similar parts of the target object.
- It is advisable to test the spray gun on cardboard or a similar surface
to find the correct setting.
IMPORTANT!
Begin spraying outside of the target area and avoid interruptions inside
the target area.
CORRECT!
Be sure to hold the spray gun at an even distance of approx. 5 - 15 cm
to the target object.
INCORRECT!
Heavy spray fog build-up, uneven surface quality.
- Move the spray gun evenly cross-wise or up-and-down, depending on
the spray pattern setting.
- An even movement of the spray gun results in an even surface quality.
INCORRECT CORRECT
CLEAN UP AND MAINTENANCE
IMPORTANT!
Never store the sprayer longer than 30 minutes without cleaning.
Dried by-products act like glue and will cause moving parts to stick.
Failure to properly clean your paint sprayer will damage the unit. Taking
the time to clean your sprayer immediately after use will help your
sprayer last longer and work correctly. If you are finished with the project
or are not going to use the sprayer within the day, you must follow these
instructions for proper clean up.
To Next Page
Loading...