RoomTec Murphy Bed Accessories - Page 13

- 12 -
Do not attempt to compress the by any other means than the one described in the step below.
Remove the mattress and with the bed in the
upright. closed position, remove the anchor
screws from the top of the bed cabinet. Do not
remove the anchor screws with the bed in the
open position.
Place the bed cabinet 2 to 3 feet away from the
wall, allowing enough room to comfortably work
behind the bed cabinet.
With a helper SECURELY holding
the bed cabinet, lower the bed 4 to
5 inches out of the cabinet.
Working from the back of the
bed, remove the screws and
bed stops.
Step 1:
Step 2:
Step 3:
Step 4:
REPLACING THE COUNTER BALANCE GAS SPRING