Note: For a finished look, apply wood veneer or
melamine edge tape to all edges marked .
Step 17:
Turn face panels over. On back side, mark
a 1/4" line the full length of the panel along
finished long edge.
Step 18:
Position bed face panels on a flat surface
good side down, and the 1/4" pencil marks
visible at outside finished edges.
Step 19:
Pick the best side of part E Face Panel
for the front of the bed.
F
F
F
F
E E
E
E
- 18 -
Finished edgeFinished edge
1/4
1/4
1/4
1/4
To Next Page
Loading...