EasyManua.ls Logo

Rope M588L - Page 10

Default Icon
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ROPE INNOVATION CO., LTD. CONFIDENTIAL NO.
ROPE-15121802
Copyright © 2017 ROPE INNOVATION CO., LTD. All rights reserved. Website: www.ropetrack.com
10
ResetPwd
Eg ResetPwd
The terminal will recover the default password
after you send this command.
Setting password has
been recovered to be
123456
pwd,oldpwd,new
pwd
Egpwd,123456,000000
Change the original password
Config OK/Config
failed
tgoogle,password
Egtgoogle,123456
Terminal will reply the current location, if the
status of terminal is not locate, it will reply you the
position of last location.
Google map link
When password is
error
Device will
reply :password
errorPlease check
SS,APN,user_na
me,user_code,IP,
PORT,ID,PASSW
ORD
Eg
SS,CMNET,1,1,174.142.39.183,7000,1388889878
8,123456
The length of APN should be in 50 characters, APN
user name and password should be not more than
30 characters.
Config OK/Config
failed
status,password
Egstatus,123456
Terminal reply: GSM signal strength, connection
and GPRS (GPRS=0 means disconnected, GPRS=1
means connected), GPS location satellite number
of tracker,
Speed = over speed threshold , speed threshold (no
set speed threshold is 0 , if you had already set
speed threshold, it will read the number which you
had set),
S =device interval time (30s by default) T =
timing sleep mode time
Key means tracker fixed status(on = fixed off
=Shedding) BAT =battery level
Mode =sleep mode type (0= non-sleep-mode
1= awake by external interrupt
2= timing wake up status )
IMEI =tracker simcard IMEI number
GSM=7
GPRS=1
GPS=7
SPEED=0
S=100
T=60
KEY=ON
BAT=92%
MODE=0
IMEI
356823031234501
When the password
is worng, it will reply
as:Get status failed
param,password
Egparam,123456
Reply of terminal: TCP, APN, APN user name,
APN password,IP , port, system number
TCPCMNET1
1174.142.39.183
888013188888888
When the password
is worng, it will reply
as:Get status failed

Related product manuals