Do you have a question about the Rope M588 and is the answer not in the manual?
GPS | Yes |
---|---|
Display | LCD |
Battery | Rechargeable lithium battery |
Waterproof Rating | IPX7 |
Compatibility | Android, iOS |
Explains the meaning of the red LED status for power and working.
Details the blue LED status indicating GPS signal reception.
Describes the green LED status for GSM network connectivity.
Lists technical specifications of the GPS tracking device.
Details the specifications and connections for device outlets.
Provides a visual diagram illustrating the device's wiring connections.
Outlines preparatory steps before installing the tracking device.
Provides instructions for physically installing the device in a vehicle.
Instructions for changing the device's password via SMS.
How to configure emergency contact numbers for SOS alerts.
Steps to remove pre-configured SOS alert numbers.
Command to check current device configuration parameters.
Command to remotely restart the device.
Command to restore the device's password to the default.
Command to retrieve the device's current GPS location.
Command to remotely disable the vehicle's engine.
Command to remotely enable the vehicle's engine.
Command to activate voice monitoring via the device.
Command to enable the device's defense/security features.
Command to disable the device's defense/security features.
Command for online configuration of network parameters.
Command to retrieve the operational status of the device.
Command to check the configured service numbers.
Command to enable automatic answering of calls for voice monitoring.
Command to disable automatic call answering for voice monitoring.
Command to reset various settings to their default values.
Command to set data reporting intervals for ACC ON/OFF.
Command to enable a power-saving sleep mode for the device.
Command to disable the device's sleep mode.
Command to limit voice monitoring to preset SOS numbers.
Command to disable limits on voice monitoring.
Troubleshooting steps for device connection problems with the platform server.
Verifies SIM card installation and power line connections.
Inspects LED indicators and GSM signal availability.
Checks if the device replies correctly after receiving SMS commands.
Ensures correct APN, port, SIM GPRS support, and IMEI number.
Ensures the correct format for sending SMS commands.