Rope M588 - Disable Engine; Enable Engine; Voice Monitoring; Enable Defence

ROPE INNOVATION CO., LTD. CONFIDENTIAL NO.
：
ROPE-15121802
Copyright © 2017 ROPE INNOVATION CO., LTD. All rights reserved. Website: www.myrope.cn
9
Disable Engine
disable eng, password
Eg: disable eng,123456
The device will disable the engine of the car
after receiving the command in the condition
that the speed of car is under 15km/h
Enable Engine
enable eng,password
Eg: enable eng,123456
The device will enable the engine after
receiving the command
Voice Monitoring
tap,password
Eg: tap,123456
The device will call back to the phone
number who sent the command
Enable Defence
arm,password
Eg: arm,123456
Config OK=Set successfully
Config failed=fail to set
If defence enabled, you are able to get illegal
start alarm when ignition is on.
Disable Defence
disarm,password
Eg: disarm,123456
Config OK=Set successfully
Config failed=fail to set
Online
Configuration
ss,apn,user_name,user_code,ip,port,id,
password
Eg:
ss,cmnet,1,1,211.154.139.208,7000,131888888
88,123456
Config OK=Set successfully
Config failed=fail to set
Check Status
status,password
Eg: status,123456
Replied SMS:
GSM=31
GPRS=1
GPS=10
ACC=N0
SPEED=120
ACCON=30S
ACCOFF=120S
VCC=12V
IMEI=356823031234501
If the password is wrong, it will reply: Get
status failed