Rope M588 - SMS Configuration; Change Password; Set SOS Alert Numbers; Delete SOS Alert Numbers

ROPE INNOVATION CO., LTD. CONFIDENTIAL NO.
：
ROPE-15121802
Copyright © 2017 ROPE INNOVATION CO., LTD. All rights reserved. Website: www.myrope.cn
8
If no username and password, please leave it blank without space,
e.g: ss, apn, , ,IP,Port ,system number,Password
the system number on the platform should be the 11digital number ,start from 13
eg: 13862626201
Defaule password is :123456
5. SMS Configuration
Function
Command
Notes
Change Password
pwd,old_pwd,new_pwd
Eg : pwd,123456,666666
Default password is 123456
Replied SMS:
Config OK=Set successfully
Config failed=fail to set
Set SOS Alert
Numbers
service,phone1,phone2,phone3,password
Eg:
service ,13512345001,13512345002,13512345
003,123456
If configured OK, when press SOS button, the
device will sent notification SMS to the preset
3 numbers.
SOS alert content: Your vehicle triggered
emergency alarm, now the location of the car
is http://maps.google.com/maps?q= Latitude,
longitude
Delete SOS Alert
Numbers
service, , , ,password
If you want to delete any one of the three
numbers, please leave it in command blank
without space.
Eg: (Delete All)
service, , , ,123456
You can choose to delete some or all the SOS
alert numbers.
Checking
Parameters
param,password
Eg: param,123456
Replied SMS: TCP, APN, APN user name,
APN password, port, system number
if the password is worng, it will reply: Get
status failed.
Remotely Restart
Restart,password
Eg: restart,123456
The device will restart after 1min after
receiving this command,
Recover Default
Password
ResetPwd
Eg: resetpwd
Password will be recovered to default
password if set successfully.
Check GPS
Location
tgoogle,password
Eg: tgoogle,123456
The device will reply with Google link after
receiving the command