Ropex RESISTRON RES-403 User Manual

ROPEX Industrie-Elektronik GmbH Tel.: +49 (0)7142-7776-0 E-Mail: info@ropex.de
Adolf-Heim-Str. 4 Fax: +49 (0)7142-7776-211 Internet: https://ropex.de
74321 Bietigheim-Bissingen (Germany) Data subject to change
24.7.20 Version 1
RESISTRON
RES-403
Important features
• Automatic zero calibration (AUTOCAL)
• Automatic optimization (AUTOTUNE)
• Automatic configuration of the secondary voltage and current ranges
(AUTORANGE, as of October 2005)
• Automatic phase angle compensation (AUTOCOMP, as of October 2005)
• Automatic frequency adjustment
• Set point selection with potentiometer
• 0…10VDC analog output for ACTUAL temperature
• Activated with contact or 24VDC signal
• Alarm function with fault diagnosis
• Heatsealing band alloy and temperature range selectable
Operating
Instructions

Ropex RESISTRON RES-403 Specifications

General

Brand	Ropex
Model	RESISTRON RES-403
Category	Temperature Controller
Language	English

Summary

General Information and Compliance

Product Overview and Intended Use

Introduces the RESISTRON controller, its purpose, and safety guidelines.

Essential Components and Materials

Details requirements for heatsealing bands, transformers, and line filters.

Operational Guidelines and Compliance

Covers maintenance, transportation, disposal, and declaration of conformity.

Application and Controller Operation

Application Scope and Key Features

Outlines the primary applications and highlights the main features of the RESISTRON controller.

Principle of Operation

Explains the core working mechanism of the temperature control system.

Installation and Setup Procedures

Installation Procedure and Steps

Guides through the physical installation procedure and detailed steps for setup.

Power Supply, Filters, and Transformers

Details power supply, line filters, and current transformer integration for proper operation.

Wiring Diagrams and Configurations

Provides visual guides for standard and specific wiring scenarios, including diagrams.

Controller Configuration, Startup, and Band Management

Covers controller setup, startup, heatsealing band management, and initial operations.

Controller Functions and Operation

Indicators, Controls, and Temperature Setting

Explains front panel elements, user controls, and how to set the desired temperature.

Core Calibration and Heating Functions

Details automatic calibration (AUTOCAL) and the START signal for heating.

Advanced Control and Monitoring

Covers impulse duration, phase angle compensation, and temperature diagnosis.

Diagnostics, Errors, and Troubleshooting

Explains heatup timeouts, diagnostic interfaces, error messages, and fault analysis.

Technical Specifications and Ordering

Factory Settings and Technical Data

Details default configurations and essential technical specifications of the controller.

Dimensions and Modifications

Provides physical dimensions and information on available optional modifications.

Ordering Information and Accessories

Guides on how to order the controller and related accessories.

Index