Wireless Router RNX-EasyN4 User Manual
New Password: Enter your new password and in Repeat New Password for
verification purposes
Click <Apply> at the bottom of the screen to save the above configurations
Remote management
This allows you to designate a host in the Internet the ability to configure the
Broadband router from a remote site. Enter the designated host IP Address in the Host
IP Address field.
Host Address: This is the IP address of the host in the Internet that will have
management/configuration access to the Broadband router from a
remote site. If the Host Address is left 0.0.0.0 this means anyone
can access the router’s web-based configuration from a remote
location, providing they know the password.
Port: The port number of the remote management web interface.
Enabled: Check to enable the remote management function.
Click <Apply> at the bottom of the screen to save the above configurations.
To Next Page
Loading...
