Wireless N Dual Band Adapter RNX-N600UBE QUICK INSTALLATION GUIDE
Humidity
Operating: 10~90% (Non-Condensing); Storage: Max. 95%
(Non-Condensing)
1.5 System Requirement
You must have at least the following
z A laptop computer/desktop PC with an available USB port
z At least a 300MHz processor and 32MB of memory
z Windows OS for Win98SE, ME, 2000, XP, Vista, 7 or Mac OS X 10.4~10.6
z A CD-ROM Drive
z USB controller properly installed and working in the computer
z A 802.11n、802.11g or 802.11a/b Wireless (and Dual Band) Access Point/Router (for
infrastructure Mode) or another 802.11n、802.11g or 802.11b wireless (and Dual Band)
adapter (for Ad-Hoc; Peer-to-Peer networking mode).
1.6 LED Status
This USB Adapter contains one LED. Please refer to the following description for LED definition.
LED
Indications
Status Working Status
Blink blue The Adapter is Radio on
Blink blue and flashing
intermittently
The Adapter is already connected but
is not transmitting or receiving data
Blink blue and fast flashing
The Adapter is activity and
transmitting of receiving data.
Radio/ACT
LED
Off The Adapter is Radio off
3
To Next Page
Loading...
Need help?
General
