Rosslare AC-Q42SB User Manual

Introduction
10 AC-Q4x Series Installation and Programming Manual
1.2 Box Content
Before beginning, verify that all of the following is in the box. If
anything is missing please report the discrepancy to your nearest
Rosslare Office.
 One controller unit
 Installation kit
 1 drilling template (label/sticker)
 1 security spline key
 1 security hex screw
 4 mounting screws and wall plugs
1.3 Ancillary Equipment
The following ancillary equipment may be required to complete your
installation:
 Electric Lock Strike Mechanism – Fail safe (power to lock) or fail
secure (power to open)
 Power supply with backup battery – 12 to 24 VDC (from a
regulated power supply) or 16 to 24 VAC (from a transformer)
 Request-to-Exit (REX) button (optional) – Normally open type;
switch is closed when pressed
 BL-D40 external sounder (optional) – Provides siren, bell, and
chime
 Magnetic contact (optional) – Installed for door monitor
capabilities

Rosslare AC-Q42SB Specifications

General

Brand	Rosslare
Model	AC-Q42SB
Category	Keypad
Language	English