Rosslare AYC-E65BG User Manual

Controller Operation
AYC-Ex5/T65 Series Installation and Programming Manual 55
If the Programming code is valid, three beeps are heard and the
controller returns to Normal mode.
If the Programming code is invalid, a long beep is
heard and the
controller returns to Normal mode.
4.9.13.2 Deleting Primary and Secondary Codes using Search
Method
To delete the Primary and Secondary codes using the Code Search
Method:
1. Enter Programming mode.
2. Press 8 to enter Menu 8.
The left LED turns red and the right LED
turns orange.
3. Enter 000 as the 3-digit user slot number.
The right LED flashes orange.
4. Perform one of the following:
Enter the 4- to 8-digit PIN code of the
Primary code belonging to the user you
want to delete.
Present the user card
of the Primary code belonging to the user
you want to delete.
The left LED flashes red.
Green
Red
Orange
Red
Orange
Red
Orange

Rosslare AYC-E65BG Specifications

General

Brand	Rosslare
Model	AYC-E65BG
Category	Controller
Language	English