Need help?Do you have a question about the Rosslare AYC-E65BW and is the answer not in the manual?
General| Input Voltage | 12V DC |
|---|---|
| Relay Outputs | 2 |
| Dimensions | 161 mm x 106 mm x 27 mm (6.3 in x 4.1 in x 1.1 in) |
| Operating Voltage | 12V DC |
| Tamper | Yes |
| Type | Controller |
| Communication | RS485 |
| Operating Humidity | 10% to 90% RH |
| Reader Technology | Wiegand, RS485 |
| Read Range | 10cm |
| Output Formats | Wiegand 26 |
| Input Formats | Wiegand |
Provides instructions on how to physically mount the unit.
Details the electrical connections for the unit.
Specific wiring instructions when the unit functions as a reader.
Specific wiring instructions when the unit functions as a controller.
Details the programming menu system for reader mode.
Steps to access the reader programming menu.
How to choose the data format for keypad input.
How to choose the data format for proximity cards.
Restores the unit to its original factory settings.
Explains user types and their access privileges.
Details the Request-to-Exit (REX) button functionality.
Overview of programming the unit as a controller.
Steps to enter the controller programming mode.
Steps to safely exit the controller programming mode.
How to change the controller's programming code.
Configures fail-safe/secure, siren, and release times.
Explains how to enroll primary and secondary user codes.
Explains how to delete user codes.
Changes PIN length and resets to factory defaults.
Procedure to replace a lost programming code.
Steps to exit Secure mode if the code is lost.
To Next Page