Rosslare AYC-E65BW User Manual

Reader Operation
28 AYC-Ex5/T65 Series Installation and Programming Manual
You hear three beeps.
The system returns to Standby mode.
3.2.8 Return to Factory Default Settings
You must be very careful before using this command! This
erases the entire memory and return all codes to their factory
default setting.
To return to factory default settings:
1. Enter Programming mode.
2. Press 0 to enter Menu 0.
Both LEDs flash red.
3. Enter your 4-digit Programming code.
If the Programming code is valid, all memory is erased. You
hear three beeps and the reader returns to Standby mode.
If the Programming code is invalid, you hear a long beep and
the reader returns to Standby mode without erasing the
memory of the reader.
Red
Green
Red
Red

Rosslare AYC-E65BW Specifications

General

Brand	Rosslare
Model	AYC-E65BW
Category	Controller
Language	English