Rotary 2000 Series User Manual

2
Column Greasing:
Lifts are greased from the factory, however, it is advised to check and ensure that the columns are still greased when
installing the lift. Apply the grease to the columns by wiping on a thin layer and polishing with a rag. Only apply grease on
surfaces of the columns where the slider blocks make contact. Be careful not to apply too much grease, only a thin layer is
needed, wipe off excess.
2' 5"
(737mm)
7' 9-3/8" (2372mm) SPOA7*
7' 1-3/8" (2168mm) SPOA7 (Narrow Bay Setting)*
8' 3-3/8" (2524mm) SPOA7 With Hybrid Arm/Pad*, SPOA7 With Low Arms
SPOA7 Series
19-1/16"
(484mm)
2' 5"
(737mm)
9' 0" (2743mm) minimum
to nearest obstruction
15' 0" (4572mm) minimum
to nearest obstruction
APPROACH
6' 0" (1829mm) minimum to nearest
obstruction or bay. 7' 0" (2134mm)
minimum to nearest wall.
Power Unit Goes
on Passenger Side
Wheel Spotting Dish
*NOTE: Dimension is from Inside of Baseplate to Inside of Baseplate.

Rotary 2000 Series Specifications

General

Brand	Rotary
Model	2000 Series
Category	Lifting Systems
Language	English