2
• Daily inspect your lift. Never operate if it malfunctions
or if it has broken or damaged parts. Use only qualified
lift service personnel and genuine Rotary parts to make
repairs.
• Thoroughly train all employees in use and care of lift,
using manufacturer’s instructions and “Lifting It Right”
and “Safety Tips” supplied with the lift.
• Never allow unauthorized or untrained persons to
position vehicle or operate lift.
• Prohibit unauthorized persons from being in shop area
while lift is in use.
• DoNot permit anyone on lift or inside vehicle when it is
either being raised or lowered.
• Always keep area around lift free of tools, debris, grease
and oil.
• Never overload lift. Capacity of lift is 7,700 lbs/3500kg.,
3850 lbs/1750kg. per platform.
• DoNotstand in front of the lift or vehicle while it is being
positioned in lift bay.
• Beforedriving vehicle into lift bay, BE SURE lift is fully
lowered.
• Loadvehicle on lift carefully. Check for secure contact
with vehicle. Raise lift to desire working height.
• DoNot block open or override self-closing lift controls;
they are designed to return to the “Off” or Neutral
position when released.
• Remain clear of lift when raising or lowering vehicle.
• Always lower lift completely and disconnect power
source before disconnecting hydraulic lines.
• Avoid excessive rocking of vehicle while on lift.
• Clear area if vehicle is in danger of falling.
• Completely lower lift before removing vehicle from lift
area.
• Normal operating temperature range is 7° C (45° F) To 38°
(100° F).
SAFETY INSTRUCTIONS
To Next Page
Loading...
Need help?
General
