Rotary 300 Series User Manual

7
WARNING
If you are not completely familiar
with automotive lift maintenance procedures STOP:
Contact factory for instructions.
To Avoid Personal Injury, permit only qualified lift
service personnel to perform maintenance on this
equipment.
UseonlygenuineRotaryreplacementpartsfor
repairs.
• Always keep all bolts tight. Check periodically.
• Alwaysraiseliftwhencleaningoorarea.
• Always keep lift clean.
• Daily: Inspect adapters for damage or excessive
wear. Replace as required with genuine Rotary
parts.
• Weekly: Inspect all lift parts for signs of damage
due to overloading and rough handling.
• Monthly: Lightly grease adapter sliding surfaces.
• Monthly: Releave residual pressure in the slave
cylinders by loosening the slave circuit shut-off
valves, screws A2 - B2. When complete tighten
screws A2 - B2.
• Semi-Annually:Checkuidlevelofliftpowerunit.
Refill if required per lift installation instructions. If
uidisrequired,inspectallhosesandseals.Repair
as required.
• Ifliftstopsshortoffullriseorchatters,checkuid
level and purge both cylinders per lift installation
instructions.
• Replace all CAUTION, WARNING, or SAFETY related
decals on the lift if unable to read or missing.
Reorder labels from Rotary Lift.
MAINTENANCE INSTRUCTIONS

Rotary 300 Series Specifications

General

Brand	Rotary
Model	300 Series
Category	Scissor Lifts
Language	English