Do you have a question about the Rotel RA-05 SE and is the answer not in the manual?
Provides an overview of the RA-05 amplifier and initial setup procedures.
Details the functions and operation of the RR-AT94 remote control.
Details the requirements and precautions for connecting the amplifier to AC power.
Explains the operation of the front panel power switch and indicator light.
Details connections for Phono, Line Level, Recorder inputs, and Preamp Outputs.
Covers speaker selection, impedance, wire choice, polarity, and connection methods.
Guides on adjusting volume, balance, bass, and treble for desired audio output.
Select input sources, monitor tapes, and mute audio output.
Connect external remote sensors and relay IR signals to other components.
Troubleshooting steps for when the power indicator does not illuminate.
Guidance on replacing the internal power fuse if the unit is unresponsive.
Steps to diagnose and resolve issues when no audio output is heard.
| Total Harmonic Distortion (THD) | < 0.03% |
|---|---|
| Input Sensitivity | 200 mV |
| Damping Factor | > 100 |
| Input Impedance | 47kΩ |
| Power Output | 40 Watts per channel (8 Ohms) |
Loading...