To Next PageTo Next Page
Need help?Do you have a question about the Rotel RA-06 SE and is the answer not in the manual?
General| Output level | 1000 mV |
|---|---|
| Damping factor | 180 |
| Amplifier class | - |
| Frequency range | 20 - 20000 Hz |
| Output impedance | 470 Ω |
| Audio output channels | - channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | 0.03 % |
| RMS power output per channel (8 Ohm) | 70 W |
| Purpose | Home |
| Product color | Black |
| Connectivity technology | Wired |
Weight and Dimensions| Depth | 342 mm |
|---|---|
| Width | 435 mm |
| Height | 92 mm |
| Weight | 7700 g |
Warnings for fire, electric shock, moisture, foreign objects, and unit damage.
Using the RR-AT94 remote control and its sensor for system management.
General safety, cable routing, and unit placement advice.
Connecting to AC power and operating the unit's power switch.
Connecting various audio sources and speakers to the amplifier.
Connecting speakers, headphones, and media devices, plus phasing.
Adjusting volume, balance, and tone controls for sound shaping.
Selecting sources, monitoring, and muting audio playback.
Connecting IR systems, using trigger outputs, and understanding protection.
Diagnosing and resolving power indicator and no sound problems.
Information on checking and replacing internal fuses.
