Rotel RA-10 User Manual

RA-10
Stereo Integrated Amplifier
Amplificateur Intégré Stéréophonique
Stereo-Vollverstärker
Amplificatore Integrato Estereofonico
Amplificador Integrado Estereofónico
Geïntegreerde Stereo Versterker
Integrerad Stereoförstärkare
Стерео интегрированный усилитель
Owner’s Manual
Manuel d’utilisation
Bedienungsanleitung
Manual de Instrucciones
Manuale di istruzioni
Gebruiksaanwijzing
Instruktionsbok
àÌÒÚÛ͈Ëfl ÔÓθÁÓ‚‡ÚÂÎfl
Register your product at
www.Rotel.com/register

Rotel RA-10 Specifications

General

Output level	1000 mV
Damping factor	180
Amplifier class	-
Frequency range	10 - 40000 Hz
Output impedance	470 Ω
Input sensitivity	150 mV
Audio output channels	- channels
Peak power per channel	40 W
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.03 %
Power consumption (standby)	0.5 W
Power consumption (typical)	220 W
Product color	Silver

Weight and Dimensions

Depth	342 mm
Width	430 mm
Height	72 mm
Weight	5900 g

Summary

Important Safety Instructions

General Safety Warnings

Warnings regarding water exposure, foreign objects, ventilation clearance, and placement on soft surfaces.

Power Cord and Plug Safety

Precautions for routing, damage, lightning, and extended periods of non-use.

Installation and Usage Precautions

Getting Started

Precautions and Preparation

Important warnings, reading the manual, saving packaging, and registration.

AC Power and Controls

Instructions on connecting the unit to power, voltage, and power switch operation.

Input Signal Connections

Phono and Ground Connections

Line Level Inputs

Speaker Outputs and Connections

Speaker Selector Switch

Control for selecting speaker sets A, B, or A+B.

Speaker Impedance and Wire Selection

Polarity, Phasing, and Connection

Troubleshooting

Power Indicator Not Lit

Fuse Replacement

No Sound

Guidance for diagnosing and resolving the absence of sound.