To Next PageTo Next PageWhat to do if my Rotel Amplifier has no sound?
If your Rotel Amplifier isn't producing sound, verify that the signal source is working correctly. Ensure the cables connecting the signal source to the amplifier inputs are properly connected. Also, confirm that the Listening Selector is set to the correct input. Finally, check the wiring between the amplifier and the speakers.
How to troubleshoot a Rotel Amplifier when the power indicator is not illuminated?
If the power indicator on your Rotel Amplifier isn't lit, test the power outlet with another electrical device, such as a lamp, to ensure the outlet is functioning. Also, make sure the power outlet isn't controlled by a switch that has been turned off.
General| Output level | 1000 mV |
|---|---|
| Amplifier class | - |
| Frequency range | 10 - 95000 Hz |
| Output impedance | 470 Ω |
| Input sensitivity | 2.5 mV |
| Audio output channels | - channels |
| Peak power per channel | 60 W |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.03 % |
| AC (power) in | Yes |
| USB 2.0 ports quantity | 1 |
| Purpose | Home |
| Impedance | 8 Ω |
| Product color | Silver |
| Connectivity technology | Wired |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 300 W |
Weight and Dimensions| Depth | 342 mm |
|---|---|
| Width | 430 mm |
| Height | 92 mm |
| Weight | 8020 g |
Covers precautions for safe operation, placement, and maintenance.
Details safe power connection, plug usage, and electrical hazard avoidance.
Explains user service limitations and conditions requiring professional inspection.
Explains common electrical safety symbols and their significance.
Details the function of each control and indicator on the RA-12 front panel.
Identifies and explains the various input and output connectors on the RA-12 rear panel.
Identifies and explains the various input and output connectors on the RA-11 rear panel.
Details the layout and operational functions of the RR-AX91 remote control.
Instructions for changing the remote control's operating code for multi-unit systems.
Guides on connecting various audio sources like turntables, CD players, and digital media.
Illustrates the correct method for connecting speakers to the amplifier outputs.
Explains how ROTEL LINK and 12V Trigger connections manage system control and overrides.
Provides connection examples for CD players and Tuners integrated with the amplifier.
Essential steps to follow before making or changing any system connections.
Recommends lowering volume before powering the amplifier on or off.
Overview of Rotel's history, philosophy, and commitment to quality.
Basic setup steps, including unpacking and initial precautions.
Explains the amplifier's performance aspects, power supply, and circuitry.
Warning about turning off all components before making connections.
Guidelines for proper amplifier placement and cable routing.
Details AC power input, voltage configuration, and electrical safety.
Explains the operation of the power switch and indicator light.
Describes the 12V trigger output for automatic component control.
Explains the amplifier's protection circuitry and its indicator.
Guides for connecting turntables and line-level audio sources.
Explains connecting digital audio sources via coaxial or optical.
Details the preamp output for connecting to other amplifiers.
Information on speaker outputs, selector switch, and impedance.
Ensures correct speaker connection polarity for proper sound.
Instructions for connecting speakers using various terminal types.
Describes the information shown on the front panel display.
Guides for connecting USB devices and Bluetooth dongle.
How to adjust volume and left-to-right sound balance.
Instructions for bypassing the bass and treble tone controls.
Details on adjusting bass and treble levels via front panel and remote.
How to adjust the front panel display brightness.
Selecting input sources and using the Rotel Link connection.
Details the RS232 input for integration with automation systems.
How to access and navigate the amplifier's settings menu.
Details settings like Bass, Treble, Balance, Tone Bypass, Dimmer, and Auto Power Off.
General tips for diagnosing and resolving audio system problems.
Troubleshooting for power indicator problems and fuse replacement.
Steps to resolve issues where no audio is produced by the unit.
Lists supported audio file formats for USB and Bluetooth connections.
Guides for troubleshooting and resolving Bluetooth pairing issues.
Lists technical audio performance metrics like power output and distortion.
Details specifications for digital inputs and supported formats.
Covers power requirements, standby consumption, and dimensions.
Provides power consumption and physical dimensions for RA-11 and RA-12.
