Need help?Do you have a question about the Rotel RA-1210 and is the answer not in the manual?
General| Dimensions | 431 x 144 x 359mm (17 x 5 5/8 x 14 1/8 inches) |
|---|---|
| Weight | 13.2kg (29lbs) |
| Damping Factor | 180 |
| Speaker Load Impedance | 4 ohms minimum |
| Frequency Response | 10Hz - 100kHz |
| Total Harmonic Distortion | <0.03% |
| Input Sensitivity | 150mV (line) |
| Signal-to-Noise Ratio | 100dB (line) |
| Input Impedance | 47k ohms (MM), 50k ohms (line) |
Diagram and description of all input/output terminals on the amplifier's rear panel.
Instructions for connecting speakers and record players, including input settings.
Connecting tuners, other sources to AUX inputs, and tape recorder interfaces.
Using separate amplifier sections and the functionality of AC outlets.
Guide on how to set the amplifier's operating voltage for different regions.
Explanation of volume, balance, bass, treble, loudness, and filter controls.
How to use the input selector, speaker control, and mode selector.
Details on monitor control, muting, power operations, and headphone use.
Performing necessary checks before operating the amplifier for the first time.
Step-by-step guides for using various input sources and tape recorders.
Advice on amplifier placement, proper grounding, and troubleshooting hum or noise.
To Next Page
