To Next PageTo Next Page
Need help?Do you have a question about the Rotel RA-1060 and is the answer not in the manual?
General| Total Harmonic Distortion | < 0.03% |
|---|---|
| Signal to Noise Ratio | > 100dB |
| Output | Speaker binding posts |
| Speaker Load Impedance | 4-16 ohms |
| Inputs | 4 line inputs, 1 phono input |
| Outputs | Tape Out, Pre Out |
| Headphone Output | Yes |
Instructions on avoiding electric shock, fire, moisture, and proper unit handling.
Guidelines for ventilation, heat sources, power supply, cord placement, and emergency shutdown.
Identifies and describes front panel controls like Volume, Listening Selector, and Record Selector.
Details rear panel connections for speakers, inputs (CD, Tuner, Aux), outputs, and power.
Illustrates speaker connections (A, B) and signal input/output wiring for Tape and CD.
Shows the AC power input socket and 12V trigger out connections on the rear panel.
Guides on unpacking the unit, selecting an installation location, and managing cables.
Instructions for using the remote control, including sensor placement and battery replacement.
Details line level inputs, recorder connections, and preamp outputs for audio sources.
Explains operation of volume, contour, listening source selection, recording, and headphone output.
Addresses no sound, power indicator not lit, fuse replacement, and protection circuit.
Lists detailed technical data including power output, distortion, frequency response, and dimensions.
