To Next PageTo Next Page
Need help?Do you have a question about the Rotel RA-1070 and is the answer not in the manual?
General| Damping Factor | 180 |
|---|---|
| Frequency Response | 10Hz - 100kHz |
| Total Harmonic Distortion | <0.03% |
| Signal to Noise Ratio | 100dB (line inputs) |
| Power Output | 100 watts per channel (8 ohms, 20Hz-20kHz, <0.03% THD) |
Instructions to prevent electric shock by not removing covers and referring to qualified personnel.
Warnings about moisture, foreign objects, and proper servicing by qualified personnel.
Guidelines for ventilation, placement, and avoiding heat sources for safe operation.
Instructions for connecting the power cord, avoiding modifications, and extension cords.
Procedure to stop use and seek service if cord, plug, or unit is damaged or spills occur.
Discusses power requirements, auxiliary outlets, and voltage configuration.
Instructions for connecting turntables and grounding to prevent hum.
Details the two sets of speaker outputs and the selector switch.
Guidelines on selecting speakers and their impedance requirements.
Emphasizes consistent polarity for proper speaker phase alignment and bass response.
Step-by-step instructions for connecting speaker wires to binding posts.
Explains the thermal and over-current protection circuits and their function.
Guides on what to do if the protection circuitry activates or repeatedly triggers.
Steps to diagnose why the power indicator light is not illuminating.
Guidance on suspecting a blown internal fuse and contacting service.
Steps to check signal source, connections, and listening selector for sound problems.
Explains the meaning of the protection indicator and troubleshooting steps.
