Need help?Do you have a question about the Rotel RB-870 and is the answer not in the manual?
Connects speakers for stereo operation, matching terminals to + and - on unit.
Connects speakers for bridged mono operation, detailing wire stripping and soldering.
Connects preamplifier L/R outputs to RB-870 L/R inputs in normal mode.
Connects preamplifier L or R output to RB-870 R input in bridged mode.
Connects RB-870 L/R inputs and outputs to RA-870 PRE OUT/MAIN IN for BTL.
Describes the function of the power button and the power indicator light.
Indicates when the unit is set to bridged mono operation (BTL).
Shows when the built-in protection circuit is active due to errors or high temp.
General| Total Harmonic Distortion (THD) | 0.03% |
|---|---|
| Damping Factor | 100 |
| Input Sensitivity | 1V |
| Signal-to-Noise Ratio | 100 dB |
| Frequency Response | 10Hz to 100kHz |
To Next Page
