Rotel RCD 940BX - CD Player Features and Specifications; Optional Digital Output and Features; Rotel Design Philosophy; Technical Specifications

your stereo and we recommend them. Ask your ROTEL hi fi AUTHORIZED DEALER for
advice about cables for analog and digital signals.
There may be an Optional 75 ohm Coaxial Digital Output on the back panel. This is to be
connected with a quality 75 ohm impedance RCA cable to the input on your external Digital to
Analog Converter. (This RCA Digital Output is Optional and not available in all markets.)
FEATURES OF THE RCD 940BX CD PLAYER
ai
This CD player uses an 18 Bit Digital to Analog Converter and an 8x Oversampling Digital
Filter. This is a good sounding CD player that will offer a lively, entertaining source of music
for your stereo system. The display panel is designed to be informative and simple. It will
provide more information if you require by pressing the appropriate buttons on the front panel
or on the remote control.
We have attempted to provide a very good sounding machine with simple features. We have
tried to do this at a reasonable price while retaining the build quality for which we are rightly
famous. We have eschewed needless complication and features that are not actually used
regularly. We like simple designs for their inherent ease of use. We believe the RCD 940BX
will be a source of pleasure for years to come in your stereo system.
A FINAL WORD FROM ROTEL ABOUT THIS CD PLAYER
We have designed this CD player for high performance using test equipment and the human
ear. We believe that both methods are useful in the design of audio electronics. This is time
consuming but we feel that the music benefits from this care and attention to detail.
We realize that there are many choices available in the market today and we thank you again
for choosing our RCD 940BX Stereo Compact Disc Player to play your CDs. Enjoy the music!
SPECIFICATIONS
RCD 940BX COMPACT DISC PLAYER
Frequency response
Harmonic distortion
Channel separation'
Speed accuracy, wow and flutter
Signal to noise ratio
Digital to analog converter
Digital filter
Power requirements
*
Power consumption
Weight
Dimensions
All specifications are accurate at the time
improvements without notice.
5 - 20,000 Hz ± 0.8 dB
< 0.005% @ 1 kHz
> 90 dB @ 1 kHz
Quartz crystal accuracy
> 110 dB
18 bit linear
8 x Oversampling
115 volts AC 50/60 Hz
230 volts AC 50/60 Hz
30 watts
4.4 kgs/ 9.7 lbs
440 (w) x 92 (h) x 316 (d) mm
17-3/8" (w) x 3-5/8" (h) x 12-7/16" (d)
f printing. Rotel reserves the right to make