Rotel RCD 940BX - Advanced Playback Programming; Track Programming and Memory; Repeat, Time, and Search Functions; Remote Control and System Connectivity

Press the Program button on the CD player or the Remote Control, the "PRGM" will show on
the Display Panel. Next to select the Track Number you wish to Program. It will be displayed in
the Display Panel. Press the Program button again and the song track will be entered into the
Program memory. Repeat this for the tracks you wish to program. Press the Program button to
review the Programmed order after you entered. The RCD 940BX will remember up to 20
tracks in a program.
The CLEAR button is used with the Program button when you wish to delete a certain track
that you have entered to the Program. Pressing the STOP or OPEN button will completely
erase a Program from the memory, if you wish. The "PRGM" on the Display Panel will
disappear.
The REPEAT button will allow you to play a whole disc or a programmed song
or songs repeatedly until you press the REPEAT button again, or press OPEN
button to cancel this function. This may be combined with Random play as
well. The REPEAT function is shown as a circular shaped arrow in the Display
Panel.
The TIME function will illuminate the time readout for the Time Elapsed in a
song, Time Remaining in a song and then Total Time Elapsed of the whole
disc by pressing Time button once by once. {No function during Random
mode)
The SEARCH buttons («, ») will cause the CD player to go forward or
backwards in time quickly when playing a song. These can be useful if you are
attempting to learn the words in a song, for example.
PtAT/
STOP
PAUSE
CD
□
tm track hi
□
a i
+4 SEARCH H
□ CD
WPEAl
THE PtANOOU
□
□
CD
1
2 3
o □
CD
4
i
i
a
□ □
7
fl i
□ □ a
0 CLEAR
a □ a
iiPS
'i f
ri
IRT1
The REMOTE CONTROL HANDSET RR 921 duplicates all the functions on
the Front Panel of the RCD 940BX except the OPEN/CLOSE button. The Play
and Pause buttons are combined on the remote for convenience. The Remote
Control includes a button for RANDOM play. This will allow you to play back a
disc in a Random sequence. Random will also play Tracks that you have
entered into a Program. Display Panel show " r n " during Random play. You
may also press Repeat with this function and the CD player will play till you
press Stop button.
j
Please refer to this drawing of the Rear panel of the RCD 940BX when connecting to your stereo system.
CONNECTING THE RCD 940BX TO YOUR STEREO
The rear panel of the RCD 940BX has the OUTPUT connections for the CD player. These are
RCA jacks and are designed to be connected to the CD or AUX. input of your stereo integrated
amp, receiver or preamplifier. Please observe the correct Left and Right Channel connections
for optimum enjoyment of your stereo. High performance patch cables will improve the sound of