To Next PageTo Next Page
Need help?Do you have a question about the Rotel RMB-1075 and is the answer not in the manual?
Warnings about internal voltages, user serviceability, and shock prevention.
Guidelines for preventing fire, water damage, ensuring ventilation, and proper placement.
Identifies controls and indicators on the amplifier's front panel.
Details all rear panel input/output connectors and their functions.
Illustrates connecting preamplifiers or processors to the amplifier inputs.
Shows the correct method for connecting speakers to the amplifier outputs.
Rotel's history, philosophy, and commitment to audio quality.
Essential precautions before operating the amplifier for the first time.
Guidelines for positioning the amplifier to ensure proper ventilation and stability.
How to connect AC power, use the power switch and indicator.
Details on 12V trigger system and amplifier protection circuitry.
Instructions for connecting audio sources via RCA and DB25 inputs.
Advice on speaker selection, wire, phasing, and connecting to binding posts.
Steps to resolve power indicator and no sound issues.
How to interpret protection light and fuse replacement advice.
Warnings about internal voltages, user serviceability, and shock prevention.
Guidelines for preventing fire, water damage, ensuring ventilation, and proper placement.
Identifies controls and indicators on the amplifier's front panel.
Details all rear panel input/output connectors and their functions.
Illustrates connecting preamplifiers or processors to the amplifier inputs.
Shows the correct method for connecting speakers to the amplifier outputs.
Rotel's history, philosophy, and commitment to audio quality.
Essential precautions before operating the amplifier for the first time.
Guidelines for positioning the amplifier to ensure proper ventilation and stability.
How to connect AC power, use the power switch and indicator.
Details on 12V trigger system and amplifier protection circuitry.
Instructions for connecting audio sources via RCA and DB25 inputs.
Advice on speaker selection, wire, phasing, and connecting to binding posts.
Steps to resolve power indicator and no sound issues.
How to interpret protection light and fuse replacement advice.
General| Number of Channels | 5 |
|---|---|
| Input Sensitivity | 1.5 V |
| Power Output | 120 watts per channel (8 ohms, all channels driven) |
| Frequency Response | 10Hz - 100kHz |
| Total Harmonic Distortion | < 0.03% |
| Signal to Noise Ratio | 116 dB |
