To Next PageTo Next Page
Need help?Do you have a question about the Rotel RMB-1095 and is the answer not in the manual?
General| Number of Channels | 5 |
|---|---|
| Frequency Response | 10Hz - 100kHz ±1dB |
| Input Sensitivity | 1.5V |
| Power Output | 200W per channel (8Ω) |
| Total Harmonic Distortion | <0.03% |
| Signal to Noise Ratio | 116dB |
Covers risks of opening unit, moisture exposure, and foreign objects to prevent hazards.
Discusses ventilation, heat sources, and the need for qualified service personnel.
Identifies front panel components such as power button and protection LEDs.
Describes rear panel inputs, outputs, trigger connections, and serial number location.
Illustrates how to connect unbalanced audio sources via RCA inputs.
Illustrates how to connect speakers to the amplifier's output terminals.
Illustrates how to connect balanced audio sources using XLR inputs.
Information about the Rotel brand's history and philosophy.
Guidance on preliminary steps and general safety advice before operation.
Covers amplifier placement, airflow requirements, and THX certification details.
Details AC power connection, power switch operation, and trigger controls.
Covers connecting unbalanced RCA, balanced XLR, and DB25 inputs.
Explains protection features, speaker impedance, wire selection, and polarity.
Methods for attaching speaker wires to the amplifier's binding posts.
Diagnosing power indicator, no sound, and protection indicator problems.
Using the front panel power switch for manual on/off control.
Setting up automatic power control using the 12V trigger input.
Using the 12V trigger output to control other components.
