Technical
Manual
SURROUND SOUND PROCESSOR
RSP-1068
Table of Contents
Specification......................................1
Parts List...........................................2~13
Upgrade Procedure...........................14
Wiring................................................15
PCB Assembly..................................16~21
Schematic Diagram ..........................22~36
SHINSEN-BLD. 4F 10-10 SHINSEN-CHO, SHIBUYA-KU,
TOKYO 150-0045, JAPAN
Serial. NO.
Beginning
®
Quality Uncompromised
Y-375A-0405/pdf
THE ROTEL CO., LTD.
Specifications
Audio
Total Harmonic Distortion
<0.008%
Intermodulation Distortion (60 Hz: 7kHz)
<0.008%
Frequency Response
10 Hz - 120 kHz, ±3 dB (Analog Bypass)
10 Hz - 95 kHz, ±3 dB (Digital Input)
Signal to Noise Ratio (IHF A-weighted)
95 dB (Analog Bypass)
92 dB (Dolby Digital, dts) 0dBFs
Input Sensitivity/Impedance
Line Level: 200 mV/100 kohms
Contour (LF/ HF)
±6 dB at 50 Hz/15 kHz
Preamp Output Level/Output Impedance
1.0 V / 1K ohms (200 mV Input)
Video
Frequency Response
3 Hz – 10 MHz, ± 3 dB (Video Input)
3 Hz – 10 MHz, ± 3 dB (Component Input)
Signal to Noise Ratio
45 dB
Input Impedance
75 ohms
Output Impedance
75 ohms
Output Level
1 volt
General
Power Consumption:
48 watts
8 watts (standby)
Power Requirements (AC)
115 volts, 60Hz (USA version)
230 volts, 50Hz (CE version)
Weight
8.4 Kg/18.5 lb.
Dimensions (W x H x D)
432 x 122 x 341 mm
17" x 4
7/8 " x 13 1/2 "
Front Panel Heightr
(feet removed/for rack mount)
109 mm / 4 5/16 "
To Next Page
Need help?
General
