Do you have a question about the Rotel RSP-1570 and is the answer not in the manual?
Connect the digital output of the CD player to any of the Optical or Coax digital inputs on the processor.
Connect DVD or Blu-ray player using HDMI, Component Video, S-Video, or Composite video connections.
Connect TV tuner using HDMI, Component Video, S-Video, or Composite video connections.
Connect the RSP-1570's preamp outputs to power amplifiers to drive speakers.
Overview of the RSP-1570's front panel controls and features.
Details the functions of the remote control.
Describes the RSP-1570's front panel and remote control buttons.
How to power the unit on/off and use standby mode.
Explains how to select source inputs for listening and viewing.
Explains navigation of the OSD menu system.
| composite and S-Video frequency response | 3 Hz - 10MHz, +/- 3 dB |
|---|---|
| component video frequency response | 3 Hz - 100MHz, +/- 3 dB |
| audio frequency response | 10Hz-120kHz, +/- 0.3 dB |
| power consumption | 60 watts |
|---|---|
| standby power consumption | 5.5 watts |
| power requirements USA version | 120 volts, 60Hz |
| THD | <0.05% |
|---|---|
| IM Distortion | <0.05% |
| S/N Ratio (IHF A) | 95 dB |
| line level input sensitivity and impedance | 200 mV / 100 k ohms |
|---|---|
| preamp output levels | 1.0 V / 1 k ohm |
| decodable digital input signal | Dolby Digital, Dolby Digital EX, Dolby Prologic IIx, DTS, DTS_ES, DTS96/24, LPCM (up to 192K), Dolby TrueHD, DTS HD Master Audio |
| weight | 9.6 kg / 22 lbs. |
|---|---|
| dimensions | 431 x 144 x 335 mm |
| front panel height | 3U / 132.6mm / 5 2/8 in |