Need help?Do you have a question about the Rotel RSP-1098 and is the answer not in the manual?
General| Type | Surround Sound Processor |
|---|---|
| Audio Channels | 7.1 |
| Frequency Response | 20 Hz - 20 kHz |
| Input Impedance | 47 kΩ |
| Input Sensitivity | 200 mV |
| Output Impedance | 100 Ω |
| Audio Formats Supported | Dolby Digital, DTS, Dolby Pro Logic II |
| Video Inputs | 3 x Component video |
| Video Outputs | 2 x S-Video, 2 x Composite video, 1 x Component video |
| Power Supply | 120V/60Hz, 230V/50Hz |
Covers crucial safety notices including risks of electric shock and proper usage.
Details the buttons, knobs, and display on the front of the RSP-1098.
Illustrates and labels all input and output connectors on the rear panel.
Describes the layout, buttons, and overall functionality of the remote.
Explains how to navigate OSD menus and configure TFT display options.
Describes the front panel controls and the TFT color LCD display.
Details remote control functions for operating the RSP-1098.
Explains OSD menu navigation and the system status display.
Explains the importance of speaker setup and bass management.
Guides on using test tones for accurate speaker level calibration.
Addresses common problems like no power, no sound, or video issues.
To Next Page
