To Next PageTo Next Page
Need help?Do you have a question about the Rotel RSP-1068 and is the answer not in the manual?
General| Type | Surround Sound Processor |
|---|---|
| Audio Channels | 7.1 |
| Input Sensitivity | 200 mV |
| Output Impedance | 100 Ω |
| Analog Outputs | 7.1 |
| Weight | 12.4 kg, 27.3 lbs |
| THD | 0.05% |
| Signal-to-Noise Ratio | > 100 dB |
| Input Impedance | 47 kOhms |
| Output Level | 2V |
| Video Inputs | Component |
| Video Outputs | Composite, S-Video, Component |
| Digital Inputs | Coaxial, Optical |
| Digital Outputs | Coaxial, Optical |
| Analog Inputs | 6 |
| Total Harmonic Distortion | 0.05% |
Connect analog audio sources like tuners, CD players, and tape decks.
Connect video sources via composite, S-Video, Component, and digital audio inputs.
Connect preamp outputs to power amplifiers and subwoofers for sound reproduction.
Overview of the front panel display, buttons, and rotary controls for operation.
Guide to using the RR-1050 remote for full system control.
Instructions for turning the unit on, off, and placing it in standby mode.
How to select audio and video sources for listening and watching.
Explanation of Dolby Digital, DTS, and their various surround sound formats.
How to manually select surround modes for different types of recordings.
Understanding navigation and basic OSD menu functions.
Set up each source input, including digital/analog assignment and custom labels.
Configure speakers, subwoofer, test tones, and delay for optimal audio setup.
Configure system settings like recording source, volume limits, and power modes.
Configure source, volume, and trigger settings for Zone 2 operation.
Solutions for common operational problems and unit issues.
Technical details and performance characteristics of the RSP-1068.
