Rotel RSX-1067 V02 User Manual

Technical
Manual
SURROUND SOUND RECEIVER
RSX-1067V02
Table of Contents
Specification......................................1
Parts List...........................................2~13
Adjustment........................................14~15
Disassembly Diagram and List.........16~17
.
Wiring................................................18
PCB Assembly..................................19~25
Schematic Diagram ..........................26~43
SHINSEN-BLD. 4F 10-10 SHINSEN-CHO, SHIBUYA-KU,
TOKYO 150-0045, JAPAN
Serial. NO.
Beginning
®
Quality Uncompromised
Y-373B-0702/pdf
THE ROTEL CO., LTD.
Specifications
Audio
Continuous Amplifier Power
(seven channels driven)
100 watts/ch (20-20k Hz, <0.05% THD, 8 ohms)
Continuous Amplifier Power
(two channels driven)
120 watts/ch (1kHz, <1.0% THD, 8 ohms, DIN)
Total Harmonic Distortion
<0.05%
Intermodulation Distortion (60 Hz:7 kHz)
<0.05%
Frequency Response
10 Hz – 120 kHz, ±3dB (analog bypass)
10 Hz – 95 kHz, ±3dB (digital input)
Signal to Noise Ratio (IHF A-weighted)
95dB (analog bypass)
92dB (Dolby Digital, dts) 0dBFs
Input Sensitivity/Impedance
Line Level: 200 mV/100K ohms
Preamp Output Level/Output Impedance
1.0 V / 1K ohms
Contour (LF/HF)
±6dB at 50 Hz/15 kHz
Decodable Digital Input Signals
Dolby Digital, Dolby Digital EX, DTS, DTS-ES,
DTS 96/24, LPCM (up to 192K), HDCD, MP3,
MPEG Multichannel
Video
Frequency Response
3 Hz – 10 MHz, ± 3dB (Digital Input)
3 Hz – 100 MHz, ± 3dB (Component V ideo)
Signal to Noise Ratio
45dB
Input Impedance
75 ohms
Output Impedance
75 ohms
Output Level
1.0 volt
FM Tuner
Usable Sensitivity
14.2dBf
Signal to Noise Ratio (at 65dBf)
70dBf
Harmonic Distortion (at 65 dBf)
0.03%
Stereo Separation (1 kHz)
45dB
Output level
1 V
Antenna Input
75 ohms unbalanced
AM Tuner
Sensitivity
500 m V/m
Signal to Noise Ratio
40dBf
Output level
500 mV
Antenna Input
Loop Antenna
General
Power Consumption:
990 watts
130 watts (idle)
19 watts (standby)
Power Requirements (AC)
115 volts, 60Hz (USA version)
230 volts, 50Hz (CE version)
Weight
20.4 Kg/44.97 lb.
Dimensions (W x H x D)
432 x 189 x 427 mm
17.01" x 7.44" x 16.81"
Front Panel Height
(feet removed for rack mount)
176 mm / 6.93"
4481001 ~

Rotel RSX-1067 V02 Specifications

General

Channels	7.1
Input Sensitivity	200mV
Input Impedance	47k ohms
Type	Receiver
Frequency Response	10Hz - 100kHz (+/- 3dB)
Video Inputs	Composite, S-Video, Component
Audio Inputs	Analog, Coaxial, Optical
Video Outputs	Composite, S-Video, Component
Audio Outputs	Analog

Summary

Technical Specifications

Audio Specifications

Detailed technical specifications for audio amplification and processing.

Tuner Performance

Technical specifications for FM and AM tuner sections.

General Unit Specifications

General specifications including power consumption, weight, and dimensions.

Unit Appearance and Controls

Front Panel Overview

Visual representation of the front panel controls and display.

Rear Panel Connections

Diagram and labels for all rear panel input/output connections.

Software Upgrade Procedure

Firmware Update Guide

Step-by-step instructions for upgrading the receiver's software.

Service and Diagrams

Disassembly Guide

Visual guide for disassembling the unit for maintenance or repair.

Wiring Schematic

Schematic illustrating internal connections between PCBs and components.

PCB Layouts and System Diagrams

Core Functional PCBs

Layouts for Front, Input, Digital, and Video PCBs.

Audio Output and Power PCBs

Layouts for Output, Multi-Input, Speaker, Power Amplifier, and Power PCBs.

System Functional Overviews

Block and Level diagrams illustrating signal flow and processing.