Need help?Do you have a question about the Rotel RSX-1067 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| Input Sensitivity | 200 mV |
| Input Impedance | 47 kOhms |
| HDMI | No |
| Type | Receiver |
| Power Output | 100 watts per channel |
| Frequency Response | 10Hz - 100kHz |
| Total Harmonic Distortion | 0.09% |
| Signal to Noise Ratio | 100 dB |
| Analog Inputs | 8 |
| Audio Outputs | 1 x Preout |
Covers precautions like avoiding moisture, proper ventilation, and electrical safety.
Guides on how to connect various speaker configurations to the receiver.
Explains how to navigate and use the OSD menu system for setup.
Guides on setting up various audio/video input sources.
Covers speaker configuration, bass management, and level calibration.
How to turn the unit on/off and manage power states.
How to choose different audio/video sources.
Common problems and their solutions for operating the RSX-1067.
To Next Page
