Do you have a question about the Roth Basicline T and is the answer not in the manual?
Protection class | IP20 |
---|---|
Weight | 0.15 kg |
Voltage | 230 V |
Frequency | 50 Hz |
Switching capacity | 16 A |
Operating temperature | +40 °C |
Guidelines for safe usage and installation of the thermostat.
Requirements for professional installation and compliance with local regulations.
Steps to verify wiring and secure the thermostat's rear housing.
Details on power terminals used for supplying the unit and switched output.
Instructions for mounting the thermostat rear case to the wall.
Guidance on optimal positioning for thermostat operation and efficiency.
Instructions for attaching the front housing to the rear mounting.
Description of symbols (BOX, Sunny, Cloudy, Moon, A, I, Vacation, Frost) and their functions.
Description of icons (Heat, Cool, Temperature) and their display meanings.
Explanation of button operations for temperature, day, timer, and parameter selection.
How to select modes and navigate through screens using button presses.
Usage of the OK key for confirming, saving, and exiting settings.
Method to enter installer parameter settings using specific key combinations.
Process for setting the time and date format on the thermostat.
How to adjust the hour and minute for the thermostat's clock.
Procedure to set the year, month, and day on the thermostat.
Using arrow keys to adjust the time for a specific program.
Procedure for setting program start times and corresponding temperatures.
Using navigation keys to select Hi, Mid, or Low temperature for programs.
How to adjust the temperature temporarily until the next program time.
Instructions for changing device parameters by installers.
Parameter for controlling the heating mode (PWM, On-Off).
Parameter to adjust temperature readings for accuracy.
Procedure to reset the device parameters to factory default settings.
Parameter for controlling the cooling mode (On-Off).
Parameter for setting the frost protection and holiday mode temperature.