Rothenberger ROAIRVAC R32 3.0 User Manual (English)

Questions and Answers:

T
Tonya LeAug 4, 2025
How to troubleshoot poor ultimate vacuum in Rothenberger ROAIRVAC R32 3.0?
- J
  justinwilliamsAug 4, 2025
  If your Rothenberger Water Pump has a poor ultimate vacuum, ensure it has been running long enough, as the final vacuum level depends on the performance time relative to the volume being evacuated. Check for leaks in the connections or the system. Turn off the pump to see if the vacuum level remains stable. Verify that all connections and equipment are appropriate. For further assistance, it is recommended to contact our Service-After-Sales.
L
Lisa WhiteAug 8, 2025
What to do if the vacuum gauge doesn’t move on my Rothenberger ROAIRVAC R32 3.0?
- R
  robert02Aug 8, 2025
  If the vacuum gauge on your Rothenberger Water Pump isn't moving even though the motor is running, first ensure that the pump is actually sucking in air. If it is, the vacuum gauge itself might be damaged. If the pump isn't sucking in air, the non-return solenoid valve could be blocked. For further assistance, it is recommended to contact our Service-After-Sales.
M
Mr. Justin Murphy Jr.Aug 14, 2025
Why is my Rothenberger Water Pump experiencing oil overconsumption?
- T
  Todd CampbellAug 14, 2025
  If your Rothenberger Water Pump is experiencing oil overconsumption, verify that you are using ROTHENBERGER oil. Ensure the drainage plug is tightly closed to prevent oil spillage. Check for any leaks in the connections or the system being evacuated, as open systems can increase oil consumption. For further assistance, it is recommended to contact our Service-After-Sales.
K
kimberlyjamesAug 18, 2025
What to do if my Rothenberger ROAIRVAC R32 3.0 is overheating?
- J
  John BauerAug 19, 2025
  If your Rothenberger Water Pump is overheating, ensure that the pump is filled with oil. Also, make sure the pump isn't covered, allowing air to flow freely around it. Check that the power supply is suitable for the pump's requirements, as indicated on the pump's label. If the issue persists, it is recommended to contact our Service-After-Sales.
M
Mr. Michael ClarkAug 23, 2025
Why is my Rothenberger ROAIRVAC R32 3.0 Water Pump making a loud noise?
- K
  Katrina CaseyAug 25, 2025
  If your Rothenberger Water Pump is making persistent loud noises, check the fan cover for any damage, as impacts can affect the fan's movement. Ensure the pump is securely screwed in place. For further assistance, it is recommended to contact our Service-After-Sales.
H
Hannah BeckerAug 29, 2025
What to do if my Rothenberger Water Pump doesn’t work?
- S
  Sheila MartinezAug 29, 2025
  If your Rothenberger Water Pump isn't working, check that it's properly connected to the power supply. Inspect the plug and cable for any damage. Verify that the power supply matches the pump's requirements as stated on its label. Also, ensure the pump is filled with oil. For further assistance, it is recommended to contact our Service-After-Sales.